Centralized Office Shreddersncadmin2017-03-19T06:43:48+00:00
Centralized Office Shredders
DestroyIt Model 2503
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip-cut model takes CDs/DVDs)
- Lifetime warranty on the cutting shafts
- Quiet and powerful single phase motor
- Fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 20 gallon shred volume
|
|
STRIP-CUT |
CROSS-CUT |
CROSS-CUT |
Shred size |
3/16″
(4mm) |
3/16″ x 1 1/2″
(4x40mm) |
3/32″ x 5/8″
(2x15mm) |
Sheet capacity |
19-21* |
12-14* |
8-10* |
Shred speed |
24ft./min. |
24ft./min. |
24ft./min. |
All Models |
|
|
|
Shipping wt. |
78lbs. |
|
|
Feed opening |
10 1/4″ |
|
|
Max. horsepower |
3/4 |
|
|
Motor output |
.58KW |
|
|
Electrical requirements |
115V |
|
|
Dimensions (DxWxH) |
14 3/4″ x 19 3/4″ x 34 1/4″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 2604
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- Electronic Capacity Control indicator prevents jams by monitoring sheet capacity levels during operation
- Automatic oil injection ensures optimal performance (cross-cut and high security models)
- High quality, hardened steel cutting shafts take staples, paper clips, credit cards, CDs and DVDs (strip-cut and cross-cut models)
- High security models meet all NSA/CSS specifications and are DOD approved
- Lifetime warranty on the cutting shafts (strip- and cross-cut models), 1 year warranty on high security cutting shafts
- Quiet and powerful single phase motor
- Sturdy Twin Drive System with fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 26 gallon shred volume
|
|
STRIP-CUT |
CROSS-CUT |
CROSS-CUT |
SMC |
Shred size |
3/16″
(4mm) |
3/16″ x 1 1/2″
(4 x 40mm) |
3/32″ x 5/8″
(2x15mm) |
1/32″ x 3/16″
(.8x5mm) |
Sheet capacity |
27-30* |
23-25* |
14-16* |
6-8* |
Shred speed |
18ft./min. |
18ft./min. |
18ft./min. |
28ft./min. |
All Models |
|
|
|
|
Shipping wt. |
123lbs. |
|
|
|
Feed opening |
10 1/4″ |
|
|
|
Max. horsepower |
1 |
|
|
|
Motor output |
.64KW |
|
|
|
Electrical requirements |
115V |
|
|
|
Dimensions (DxWxH) |
18 1/2″ x 19 1/2″ x 36 1/2″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 3104
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- Electronic Capacity Control indicator prevents jams by monitoring sheet capacity levels during operation
- High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip-cut and 4 x 40 cross-cut models take CDs/DVDs)
- Lifetime warranty on the cutting shafts
- Quiet and powerful single phase motor
- Sturdy Twin Drive System with fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 32 gallon shred volume
|
|
STRIP-CUT |
CROSS-CUT |
CROSS-CUT |
Shred size |
3/16″
(4mm) |
3/16″ x 1 1/2″
(4x40mm) |
3/32″ x 5/8″
(2x15mm) |
Sheet capacity |
27-30* |
22-25* |
14-17* |
Shred speed |
18ft./min. |
18ft./min. |
18ft./min. |
All Models |
|
|
|
Shipping wt. |
132lbs. |
|
|
Feed opening |
12″ |
|
|
Max. horsepower |
1 |
|
|
Motor output |
.64KW |
|
|
Electrical requirements |
115V |
|
|
Dimensions (DxWxH) |
18 1/2″ x 21″ x 36 1/2″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 3105
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- Electronic Capacity Control indicator prevents jams by monitoring sheet capacity levels during operation
- Automatic oil injection for optimal performance
- High quality, hardened steel cutting shafts take staples, paper clips, credit cards, CDs and DVDs
- Lifetime warranty on the cutting shafts
- Quiet and powerful single phase motor
- Sturdy chain drive with fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 37 gallon shred volume
|
|
CROSS-CUT |
CROSS-CUT |
Shred size |
3/16″ x 1 1/2″
(4x40mm) |
3/32″ x 5/8″
(2x15mm) |
Sheet capacity |
37-39* |
24-26* |
Shred speed |
30ft./min. |
30ft./min. |
All Models |
|
|
Shipping wt. |
324lbs. |
|
Feed opening |
12″ |
|
Max. horsepower |
2 1/8 |
|
Motor output |
1.6KW |
|
Electrical requirements |
115V (20 amp. dedicated line required) |
Dimensions (DxWxH) |
23″ x 22″ x 40″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 3804
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- Electronic Capacity Control indicator prevents jams by monitoring sheet capacity levels during operation
- High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip-cut and 4 x 40 cross-cut models take CDs/DVDs)
- Lifetime warranty on the cutting shafts
- Quiet and powerful single phase motor
- Sturdy Twin Drive System with fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 44 gallon shred volume
|
|
STRIP-CUT |
CROSS-CUT |
CROSS-CUT |
Shred size |
1/4″
(6mm) |
3/16″ x 1 1/2″
(4x40mm) |
3/32″ x 5/8″
(2x15mm) |
Sheet capacity |
29-31* |
24-26* |
12-14* |
Shred speed |
20ft./min. |
20ft./min. |
20ft./min. |
Shipping wt. |
232lbs. |
233lbs. |
233lbs. |
All Models |
|
|
|
Feed opening |
16″ |
|
|
Max. horsepower |
1 |
|
|
Motor output |
.64KW |
|
|
Electrical requirements |
115V |
|
|
Dimensions (DxWxH) |
23 1/4″ x 25 1/4″ x 38 1/4″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 4002
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- Electronic Capacity Control indicator prevents jams by monitoring sheet capacity levels during operation
- Automatic oil injection for optimal performance (cross-cut models)
- High quality, hardened steel cutting shafts take staples, paper clips, credit cards, CDs and DVDs
- Lifetime warranty on the cutting shafts
- Quiet and powerful single phase motor
- Sturdy Twin Drive System with fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 44 gallon shred volume
|
|
STRIP-CUT |
CROSS-CUT |
CROSS-CUT |
Shred size |
1/4″
(6mm) |
3/16″ x 1 1/2″
(4x40mm) |
3/32″ x 5/8″
(.8x5mm) |
Sheet capacity |
32-35* |
24-26* |
14-16* |
Shred speed |
30ft./min. |
25ft./min. |
25ft./min. |
Shipping wt. |
239lbs. |
240lbs. |
240lbs. |
All Models |
|
|
|
Feed opening |
16″ |
|
|
Max. horsepower |
1 3/4 |
|
|
Motor output |
1.3KW |
|
|
Electrical requirements |
115V |
|
|
Dimensions (DxWxH) |
23 1/4″ x 25 1/4″ x 38 1/4″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 4005
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Automatic reverse and power cut-off when overfed
- Double protection against overheating
- Sleep mode cuts off power supply after 30 minutes of inactivity
- Automatic start and stop controlled by photo cell
- Electronic Capacity Control indicator prevents jams by monitoring sheet capacity levels during operation
- Automatic oil injection for optimal performance
- High quality, hardened steel cutting shafts take staples, paper clips, credit cards, CDs and DVDs (strip- and cross-cut models)
- High security models meet all NSA/CSS specifications and are DOD approved
- Lifetime warranty on the cutting shafts (strip- and cross-cut models), 1 year warranty on high security cutting shafts
- Quiet and powerful single phase motor
- Sturdy chain drive with fully enclosed gear housing
- High quality wooden cabinet mounted on casters
- Plastic shred bin does not require disposable bags
- 44 gallon shred volume
|
|
STRIP-CUT |
CROSS-CUT |
CROSS-CUT |
SMC |
Shred size |
1/4″
(6mm) |
3/16″ x 1 1/2″
(4x40mm) |
3/32″ x 5/8″
(2x15mm) |
1/32″ x 3/16″
(.8x5mm) |
Sheet capacity |
50-52* |
37-39* |
24-26* |
10-12* |
Shred speed |
40ft./min. |
30ft./min. |
30ft./min. |
44ft./min. |
Shipping wt. |
343lbs. |
378lbs. |
378lbs. |
390lbs. |
All Models |
|
|
|
|
Feed opening |
16″ |
|
|
|
Max. horsepower |
2 1/8 |
|
|
|
Motor output |
1.6KW |
|
|
|
Electrical requirements |
115V |
|
|
|
Dimensions (DxWxH) |
23 1/4″ x 25 1/4″ x 39 3/4″ |
*may vary due to variations in paper and power supply |
|
|
DestroyIt Model 0101 HDP
HARD DRIVE PUNCH
“Easy Switch” control element uses color codes and back-lit symbols to indicate operational status and functions as an emergency stop switch
- Electronically controlled, transparent safety shield in the feed opening
- Automatic power cut-off when shred bin is full or when cabinet door is opened
- Double protection against overheating
- Punches a hole completely through the hard drive, making it unreadable
- Suitable for 2 1⁄2″ and 3 1⁄2″ drives (single feed)
- Slide lever for easy selection of hard drive size
- Adjustable feed chute made of high quality steel
- LEDs illuminate feed chute during punching process
- Punching die made of hardened, nickel-plated steel
- Automatic reverse on punching die prevents jams
- Slider mechanism for unloading punching compartment – destroyed drives drop into a sturdy collection bin to await proper disposal
- Quiet and powerful single phase motor rated for continuous operation
- Sturdy Twin Drive System with dust-proof gear box housing
- High quality wooden cabinet mounted on casters
- Anti-static collection bin made of impact resistant plastic
- 1 year warranty on all parts, excluding wearables
|
|
HARD DRIVE PUNCH |
Hard drive sizes |
2 1/2″ and 3 1/2″ |
Punching cycle |
15 seconds |
Shipping wt. |
208lbs. |
Max. horsepower |
1 |
Motor output |
.64KW |
Electrical requirements |
115V |
Dimensions (DxWxH) |
18 1/2″ x 19 1/2″ x 33 1/2″ |
|
|
|
|
Desk Side / Personal Shredders | High Capacity Shredders | Shredder Supplies and Accessories